ECU REFLASH- Remapping your factory ECU to provide you with more power and torque (Designed and modified for stock engines)
The V-Spec range primarily suits current model vehicles. -Manufactured from Safari’s own Industrial Spec UV Stabilised Polyethylene material. -Available for most popular, current model 4wd vehicles. -Stainless steel mounting hardware & EPDM moulded rubber connection hoses to ensure the snorkel - lasts the vehicle lifetime. -Water tight raised air intake for ultimate engine protection against water and dust ingress. Australian Made. -Life Time warranty.
-The Safari ARMAX™ performance range of Snorkels feature: -Designed and flow tested by our in house engineers for maximum performance. -Dynamometer tested to ensure proven results. -Development and verification in conjunction with other ARMAX™performance enhancement products. -Safari’s water separating style Air Ram with a 4”(101.6mm) outlet and an optimised air flow, low restriction grill. -Water tight raised air intake for ultimate engine protection against water and dust. -Safari’s own Industrial Spec UV Stabilised Polyethylene material. -Life Time warranty. SS982HP ¹
" DPF Back Exhaust -Available Sound Options include 11"x6" Large Straight Through Muffler, 5" Round Straight Through -----Resonator or Muffler Delete (Pipe Only) -Features and Benefits: -Australian Designed and Made -10-Year Warranty -409 Stainless Steel Tube -4 Bolt, 10mm Thick Flange Plates -Extreme Duty Hanger Brackets -Removable Plug Boss for EGT (1/4" NPT) -Pressed Fire Ring Gaskets -Coated with Premium Heat Proof Paint
Piggy Back ECU enabling real time tuning of boost, injector duration & rail pressure. Mobile App with digital dash and 4 switchable maps - Factory, Towing, Power, Ai. Built in boost & rail pressure gauges. Up to 25% more torque and ~1.5 L/100km fuel savings
DIY 15 min. installation Mobile App controller Dash mounted controller 14 Levels of response Ramble Idle Winch Mode Security Mode Anti Slip Mode ECO Mode
GT & Boost gauge kit includes 60psi digital Boost Gauge with 1000 degree analogue EGT Gauge, weld in exhaust bung, fittings, temperature sensor, wiring and dash mount
The vehicle EGR (Exhaust Gas Recirculation) system reduces engine emissions but has some inherent compromises regarding engine efficiency and reliability. The system works by recirculating exhaust gasses back into the combustion chamber during low engine loads (typically from idle to half throttle) the valve opens and some of the already burned exhaust gases are sent back to the intake to get mixed with fresh air and are combusted for a second time. The combustion temperatures are reduced which in turn reduces the NOx (Nitrogen Oxide) emissions. Failure often occurs when the dirty exhaust gasses clog up the valve causing it to stick in the open position. When this happens the engine is starved of oxygen and becomes sluggish and inefficient, in some cases the vehicle can become almost undriveable. The EGR valves can also fail electronically when the internal motor or position sensors fail. Over time the wet burned gases layer themselves on the hot intake ports of the head and build up to significantly block the ports and reduce the engines ability to breathe.
Ford Ranger PX2 2015 onwards (Non DPF & DPF) The Safari ARMAX 'X Series' Engine Control Unit (ECU) is designed to work harmoniously with your vehicles OE Engine Control Unit resulting in more power, more torque, better throttle response, less fuel consumption and less turbo lag. This is all backed up by Safari’s sophisticated engine protection systems which are constantly live monitoring your vehicle for total drivetrain safety and ultimate reliability.
Designed locally in Australia, Rockarmor's all new GT Bullbar series comes with a modern look, suited towards today's late model vehicles, that require maximum protection, while complementing your vehicle's factory modern aesthetics. As well as offering your Ranger with maximum frontal protection, The Rockarmor GT bullbar has been designed to improve your Rangers off road experience with a number of features that include, higher approach angles, Built in Rated Recovery points for off road recoveries, and provisions for vital accessories that includes, electric winches, driving lights & uhf communication. The full bumper replacement Steel bullbar allows you to fit the GT bullbar to your Ford with out having to cutting the factory bumper. The Rockarmor GT Bullbar, has been engineered to be compatible with your vehicle safety features which include the front safety camera & bumper sensors. The bullbar is finished in a highly durable black powder coat finish, Optional colour matching is available through your local Rockarmor Distributor. To comply with NZTA all daytime running lights should be installed separately to your headlights. Also note that the fog lights need to be adjusted to three degrees down. Features & Specifications: Built in 3.2Tonne Rated Recovery Points 52 mm Top cross tube for maximum frontal protection Durable 2.8mm High Quality steel construction for maximum protection Designed for high approach angles Built in LED FOG lights & LED Indicator, compatible with factory controls Extended centre Bash Plate Included ADR Complied Air bag compatible mounting system Factory Sensor & Front Camera Compatible Replacement Windscreen Washer bottle included Side under Protection panels Included Twin Slotted Antenna Mounts located on top Cross Tube Twin Hi-Lift jack points Front Protection Buffers Accommodation for Electric Winch up to 12,000 pound Laser cut Holes to accommodate for driving lights Shot blasted, Chemical Washed Finished off in a high quality black powder coat finish
GT STEEL HOOP BULLBAR - FORD PX RANGER Designed in Sydney Australia, Rockarmor’s design & engineering team left no stone unturned, making sure the PX Ranger GT bull bar would cater for the true 4x4 enthusiasts. With its harmonious blend of commanding aesthetics and refined details, the ADR Approved bull bar is guaranteed to captivate fellow automotive enthusiasts, while Rockarmor's expert engineers have seamlessly incorporated a comprehensive range of essential features that enhance the driving experience for all PX2 & PX3 Ford Ranger & Wildtrak owners, regardless of the terrain or challenges they may face. Suits: PX2 Ranger & PX3 Ranger FITTING VIDEO BELOW Features & Specifications: Built in 3.2Tonne Rated Recovery Points (Each recovery point) *Soft Shackle Compatible) 51mm Top cross tube for maximum frontal protection Durable 2.8mm High Quality steel construction for maximum protection Designed for high approach angles (great for off-road) Built in LED FOG lights & LED Indicator, compatible with factory controls Extended Silver Centre Bash Plate (Protects Front) ADR Complied Air bag compatible mounting system Factory Sensor Compatible Side under Protection panels Included Twin Slotted Antenna Mounts located on top Cross Tube Twin Hi-Lift jack points Front Protection Buffers Accommodation for a Electric Winch up to 12,000 pound (Built in winch plate) Laser cut mounting Holes to accommodate for driving lights (Ability to mount 2 x 9" LED Driving Lights) Shot blasted, Chemical Washed (for extra protection against rust) Finished off in a high quality black powder coat finish
ROCKARMOR GT STEEL HOOP BULLBAR COMBO PACK - FORD RANGER NOTE RA NGER PX1 WILL REQUIRE A BUMBER CUT Bullbar Frontal Pack Ford Ranger Rockarmor Ranger GT Hoop Bullbar (No bumper cut required) Rockarmor 12,000 pound Winch (wireless controller & synthetic winch rope) Rockarmor 9" LED Phantom Spotlights - (with wiring loom and internal switch) GT BULLBAR (NO BUMPER CUT REQUIRED FOR THIS VEHICLE) Designed & tested in Australia, Rockarmor’s GT Steel Bullbar provides your vehicle with the ultimate vehicle frontal protection. Making sure air flow to the engine is maintained, the Rockarmor GT bullbar is manufactured out of 3mm steel and features a 50mm diameter cross bar which protects the full front of the vehicle against any potential animal strikes that may harm areas like your head lights, front grill and engine components. Designed to be functional for vehicles that drive both on road & off road, the GT bullbar has been engineered to store vital accessories such as a Winch, UHF Antenna, safety flags, driving lights plus allowance of a high lift jack recovery. The design of the GT bullbar was also designed to give you maximum approach angle when offroading and enhanced your truck with a aggressive offroad look. The GT bullbar comes complete with L.E.D fog lights, L.E.D indicators, under body stone guards and is finished with a high quality powder coat that will withstand harsh weather conditions. 100% ADR Compliant, and Air Bag approved, Rockarmor’s GT bull bar is put through a strict set of tests that gives you confidence your vehicle will be protected at all times. Bull Bar Features: 50mm tube 3mm Steel Bulit in recovery points Twin high lift jack points Twin Slotted Antenna Mounts Winch Compatible Winch plate & Mounting Cradle 2 in 1 System LED indicators + Day light running light & FOG LIGHT included Centre bash plate included Stone guard splash plates included Pre drilled Holes for driving lights ADR Complied (Locally tested in Adelaide Australia) ROCKARMOR PHANTOM 9" LED DRIVING LIGHTS Rockarmor’s latest innovation, the Phantom 9 Lights are rugged off-road champions designed to light up the darkest highways and remote tracks, offering unparalleled performance and durability. Built to withstand the harshest conditions, these lights are dustproof and waterproof, ensuring reliability in any environment! Experience exceptional long-distance visibility, providing you with the confidence to conquer any terrain! TECHY STUFF IP RATING: IP68 DISTANCE: 1 LUX @ 1400 METRES POWER: 396 WATTS PER PAIR LED TYPE: 33 X OSRAM LEDS COLOUR TEMP: 6500K LUMENS: 13,000 EFFECTIVE LUMENS FRAME: FULLY ADJUSTABLE 60 DEGREE ALUMINIUM FRAME LENS: POLYCARBONATE COOLING: HIGH SPEED PASSIVE COOLING SYSTEM DAY LIGHT RUNNING LIGHT: BUILT IN WHATS IN THE BOX MOUNTING HARDWARE PHANTOM COVERS 2 X LED DRIVING LIGHTS WIRING HARNESS WITH INTERNAL SWITCH ROCKARMOR RECOVERY M8 12,000 Pound Winch 5 Year Manufacturers Warranty 7.2HP Motor IP67 Rated (2 Hours Fully Submersible) Wireless Controller (inbuilt receiver) Controller with Extension Lead Rockarmor Alloy Hawse Fairlead Synthetic Winch Rope Pro Link Control Box Mounting Bracket Hand Saver Strap Installation Guide Book Specification Line Pull: 5,443kgs / 12,000lbs Motor: Series Wound DC12V / 7.2HP Gear Train: 3 Stage Planetary Gear Ratio: 216:1 Free Spooling Clutch with Rotating Gear Ring IP67 Rated (2 Hours Fully Submersible Installation Guide Book Synthetic Winch Rope: 9.5mm x 28 metres Wireless Receiver: Built into the Control Box Isolator Switch: Built into the Control Box Drum Size: 64mm x 224mm Weight of Winch: 26kgs Mounting Bolt Pattern: 254mm x 114.3mm Dimensions: 535 X 162 X 170MM Warranty: 5 Years Limited Electrical & Mechanical
ROCKARMOR GT STEEL HOOPLESS BULLBAR COMBO PACK - FORD RANGER NOTE PX1 WILL REQUIRE A BUMPER CUT ROCKARMOR GT HOOPLESS BULLBAR FRONTAL PACK BULLBAR TO SUIT FORD RANGER PX1, 2 & 3 Rockarmor GT Steel Hoop Bullbar (No bumper cut required) Rockarmor 12,000 pound Winch (wireless controller & synthetic winch rope) Rockarmor 9" LED Phantom Spotlights - (with wiring loom and internal switch) FITTING VIDEO BELOW GT BULLBAR (NO BUMPER CUT REQUIRED FOR THIS VEHICLE) Designed & tested in Australia, Rockarmor’s GT Steel Bullbar provides your vehicle with the ultimate vehicle frontal protection. Making sure air flow to the engine is maintained, the Rockarmor GT bullbar is manufactured out of 3mm steel and features a 50mm diameter cross bar which protects the full front of the vehicle against any potential animal strikes that may harm areas like your head lights, front grill and engine components. Designed to be functional for vehicles that drive both on road & off road, the GT bullbar has been engineered to store vital accessories such as a Winch, UHF Antenna, safety flags, driving lights plus allowance of a high lift jack recovery. The design of the GT bullbar was also designed to give you maximum approach angle when offroading and enhanced your truck with a aggressive offroad look. The GT bullbar comes complete with L.E.D fog lights, L.E.D indicators, under body stone guards and is finished with a high quality powder coat that will withstand harsh weather conditions. 100% ADR Compliant, and Air Bag approved, Rockarmor’s GT bull bar is put through a strict set of tests that gives you confidence your vehicle will be protected at all times. Bull Bar Features: 50mm tube 3mm Steel Bulit in recovery points Twin high lift jack points Twin Slotted Antenna Mounts Winch Compatible Winch plate & Mounting Cradle 2 in 1 System LED indicators + Day light running light & FOG LIGHT included Centre bash plate included Stone guard splash plates included Pre drilled Holes for driving lights ADR Complied (Locally tested in Adelaide Australia) ROCKARMOR PHANTOM 9" LED DRIVING LIGHTS Rockarmor’s latest innovation, the Phantom 9 Lights are rugged off-road champions designed to light up the darkest highways and remote tracks, offering unparalleled performance and durability. Built to withstand the harshest conditions, these lights are dustproof and waterproof, ensuring reliability in any environment! Experience exceptional long-distance visibility, providing you with the confidence to conquer any terrain! TECHY STUFF IP RATING: IP68 DISTANCE: 1 LUX @ 1400 METRES POWER: 396 WATTS PER PAIR LED TYPE: 33 X OSRAM LEDS COLOUR TEMP: 6500K LUMENS: 13,000 EFFECTIVE LUMENS FRAME: FULLY ADJUSTABLE 60 DEGREE ALUMINIUM FRAME LENS: POLYCARBONATE COOLING: HIGH SPEED PASSIVE COOLING SYSTEM DAY LIGHT RUNNING LIGHT: BUILT IN WHATS IN THE BOX MOUNTING HARDWARE PHANTOM COVERS 2 X LED DRIVING LIGHTS WIRING HARNESS WITH INTERNAL SWITCH ROCKARMOR RECOVERY M8 12,000 Pound Winch 5 Year Manufacturers Warranty 7.2HP Motor IP67 Rated (2 Hours Fully Submersible) Wireless Controller (inbuilt receiver) Controller with Extension Lead Rockarmor Alloy Hawse Fairlead Synthetic Winch Rope Pro Link Control Box Mounting Bracket Hand Saver Strap Installation Guide Book Specification Line Pull: 5,443kgs / 12,000lbs Motor: Series Wound DC12V / 7.2HP Gear Train: 3 Stage Planetary Gear Ratio: 216:1 Free Spooling Clutch with Rotating Gear Ring IP67 Rated (2 Hours Fully Submersible Installation Guide Book Synthetic Winch Rope: 9.5mm x 28 metres Wireless Receiver: Built into the Control Box Isolator Switch: Built into the Control Box Drum Size: 64mm x 224mm Weight of Winch: 26kgs Mounting Bolt Pattern: 254mm x 114.3mm Dimensions: 535 X 162 X 170MM Warranty: 5 Years Limited Electrical & Mechanical